Volvo drivers tend to value safety, durability, and thoughtful design, and your repair shop should respect that. If your vehicle was damaged in a collision or has dents, scrapes, or bumper damage, Howard Brown & Sons Auto Body, provides careful, high-quality auto body repair for West Los Angeles and Santa Monica drivers. Family-owned since 1972, we focus on honest recommendations, quality workmanship, and a repair process that keeps you informed every step of the way.
From the XC90 and XC60 to the S60, S90, and V60, we inspect both visible and underlying damage so your Volvo is repaired with long-term safety and reliability in mind. We’re here to make the process straightforward and deliver repairs that look right, drive right, and feel right when you get back on the road.
From minor parking lot dents to heavier collision damage, we repair Volvo vehicles with a careful, step-by-step process and clear communication throughout.
- Collision repair: front-end, rear-end, and side-impact damage
- Auto body repair: doors, fenders, quarter panels, and rocker panels
- Bumper & fender repair: with close attention to trim, mounting points, and sensor-related components
- Scratch, dent & cosmetic repair: parking lot dents, scuffs, scrapes
- Auto paint & refinish: advanced color matching and clean blending
- Frame & structural repair: when impact damage affects the vehicle’s structure
- ADAS scan/calibration coordination: when required after certain repairs
Get Your Volvo Repair Estimate Today
Request your free estimate online or give us a call (310) 477-3934 to restore your Volvo today.

Volvo repairs require a careful, detail-focused approach, especially on newer models with advanced safety systems, tight panel fit, and clean Scandinavian design lines that leave little room for error. At Howard Brown & Sons Auto Body, we look beyond the visible damage to make sure your Volvo is repaired with the same level of care we’d expect for our own family’s vehicle.

Many Volvo models rely on cameras, radar, and sensors for safety features like collision avoidance and lane keeping. After certain repairs, scans and calibration may be needed to help those systems function as intended.
No two repairs are exactly the same. We assess where and how your Volvo was damaged, then choose the proper repair approach based on the condition of the vehicle, not a one-size-fits-all process.
Volvo’s paint finishes, especially lighter metallics and subtle tones, can show differences quickly in sunlight. We use high-quality paint systems, careful color matching, and proper blending so the repair looks consistent with the rest of the vehicle.
Volvo design is clean and intentional, which means even small gaps or misalignment can stand out. We focus on proper fit, secure mounting, and straight body lines before the vehicle moves into paint.
Even a low-speed hit can affect brackets, reinforcements, or internal components behind the panels. That’s why we inspect beneath the surface, not just what’s immediately visible.
Wheel-area impacts or curb contact can throw off alignment and how your Volvo drives. When needed, we check and address these issues to make sure the vehicle tracks properly after repairs.
Volvo owners come to us when they want the work done carefully and the process handled professionally, without the corporate runaround.

Since 1972 - three generations; long-standing West LA shop. 750+ 5-star reviews.

I-CAR certified technicians and a process built around doing repairs correctly
dent repair

Just off the 10 freeway, between Barrington and Bundy

PPG paint + advanced color matching, and straight talk when insurance proposes alternatives
Driving around West LA often means tight parking, crowded streets, garage scrapes, and the occasional low-speed impact. For Volvo owners, that usually leads to a familiar set of repair needs, especially on bumpers, panels, wheels, and paint.
common after tight parking situations in Santa Monica, Brentwood, and busy West LA shopping areas where small impacts and scraped bumpers happen all the time.
often needed after curb contact, tight turns, or light impact damage that affects the wheel opening, fender edge, or nearby trim.
from side-swipes in narrow lanes in Brentwood or tight parking spots at the Farmer's Market
for chips, scrapes, and repaired areas that need a clean, even finish
from stop-and-go traffic incidents on the 405 near Culver City and low-speed front-end contact
We work on a wide range of Volvo sedans, wagons, and SUVs for drivers across West Los Angeles, Santa Monica, and the surrounding Westside areas, including:
We keep it clear and predictable, especially if this is your first accident.
Start with photos or bring your Volvo in. We’ll explain what we see and what’s likely involved.
If hidden damage is likely, disassembly helps confirm the true scope and document it properly.
Body repair, panel alignment, and structural planning when required—done in the right order.
Prep, color match, blend strategy (when needed), and clear coat finish.
Quality checks & delivery
Final inspection for fit, finish, and system status. We’ll review the work with you before you head out.
Ready to fix your Volvo?
We’re located in West Los Angeles and regularly serve drivers across the westside including: Santa Monica, Brentwood, Beverly Hills, Westwood/UCLA, Culver City, and Marina del Rey.
If insurance is involved, we can help reduce the stress. We work with all insurance companies and can manage the documentation and communication needed to move your claim along.
A few helpful tips:
- You can choose your repair shop - you don’t have to go where the insurer suggests.
- Supplements are normal: once a vehicle is disassembled, hidden damage can be documented properly.
- If parts options come up, we’ll explain OEM vs alternative choices clearly - so you can make an informed decision.
Come see why Howard Brown and Sons has been a top-rated family-owned body shop for over 50 years serving West LA drivers!
Volvo body repair costs can vary a lot depending on the extent of the damage, the parts involved, and whether paint, structural work, or sensor-related repairs are needed. A small cosmetic repair will cost much less than a larger collision job, so the best place to start is with an estimate based on your specific Volvo.
Yes. We use OEM parts whenever possible. That helps us keep repairs aligned with manufacturer standards for fit, safety, and long-term quality.
Yes. We use the PPG paint system along with advanced color-matching and blending techniques to help repaired panels match the rest of your Volvo as closely as possible.
Sometimes. It depends on the model and where the vehicle was damaged. If your Volvo has driver-assist features and the repair affects those areas, scans or calibration may be required after body work.
Repair time depends on the damage, parts availability, and whether additional repair steps are needed once the vehicle is disassembled. In general, smaller jobs can be done in a day or two but may take around 4 to 5 days, while larger collision repairs can take 2 to 3 weeks without parts delays.
The cost of Volvo collision repair depends on how extensive the damage is, which parts need repair or replacement, and whether paint, structural work, or calibration is needed. The best way to get an accurate number is with an estimate based on your specific vehicle and damage.
Have a question?
Get in touch with us!

Since 1972 - three generations; long-standing West LA shop with 750+ 5-star reviews across Google and Yelp

PPG paint + advanced color matching, and straight talk when insurance proposes alternatives

I-CAR, aluminum structure and carbon fiber certified technicians built around doing repairs correctly
© 2026. Howard Brown & Sons Auto Body. All Rights Reserved.